FORMULATION OF POLYMERIC INHIBITOR FOR VISCOSITY REDUCTION OF CRUDE OIL
DOI:
https://doi.org/10.51200/bsj.v40i1.4432Keywords:
Crude Oil, Ethylene-vinyl acetate, Methylcyclohexane, Paraxylene, Wax, Response surface methodology (RSM)Abstract
Generally, waxes and asphaltenes are classified as solid category which involved with deposition of high-molecular-weighted compounds along pipelines which leads to production issues. This study presents the effect of different mixture concentration consisting of copolymer and solvent on crude oil viscosity in order to find a solution for reduction of wax and asphalthene deposition along the surface of pipelines. There were two proportions used which are ethylene-vinyl acetate 25 (EVA 25), methylcyclohexane (MCH) and paraxylene as first proportion and EVA 40, MCH and paraxylene as second proportion. EVA is a polymer that comprises of linear chain of polyethylene fragment and vinyl acetate molecule which has the ability in controlling the size of formed wax crystals. Laboratory experiments were designed by response surface methodology (RSM) specifically using central composite design (CCD) to formulate ratio and analyzed optimum percentage composition of mixture to obtain a good model. The optimum parameters were 10.02% of EVA 25, 10.00% of MCH and 79.98% of paraxylene for first proportion and 10.00% of EVA 40, 45.78% of MCH and 44.22% of paraxylene for second proportion to minimize the viscosity of crude oil.
References
Aiyejina, A., Chakrabarti, D. P., Pilgrim, A. & Sastry, M. K. S. 2011. Wax formation in oil pipelines: A critical review. International Journal of Multiphase Flow, 37(7), 671-694.
Anisuzzaman, S. M., Krishnaiah, D. & Madsah, M. 2019. Effect of various polymeric crystal modifiers and solvents formulations on the prevention of wax and asphaltene formation in crude oil pipelines. Petroleum & Petrochemical Engineering Journal, 3(2), 1-10.
Anisuzzaman, S. M., Yeow W. F. & Madsah, M. 2018. A review on various techniques and recent advances in polymeric additives to mitigate wax problems in crude oil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48(1), 53-64.
Anisuzzaman, S. M., Abang, S., Bono, A., Krishnaiah, D., Karali, R. & Safuan, M. K. 2017. Wax inhibitor based on ethylene vinyl acetate with methyl methacrylate and diethanolamine for crude oil pipeline. IOP Conference Series: Materials Science and Engineering, 206(012074), 1-8.
Anisuzzaman, S. M., Abang, S., Bono, A., Krishnaiah, D., Ismail, N. M. & Sandrison, G. B. 2017. An evaluation of solubility of wax and asphaltene in crude oil for improved flow properties using a copolymer solubilized in organic solvent with an aromatic hydrocarbon. International Journal of Chemical and Molecular Engineering, 11(10), 688-695.
Ariza-León, E., Molina-Velasco, D. R. & Chaves-Guerrero, A. 2014. Review of studies on asphaltene – wax interaction and the effect thereof on crystallization. CT&F – Ciencia, Tecnología y Futuro, 5(5), 39-53.
Bai, C. & Zhang, J. 2013. Effect of carbon number distribution of wax on the yield stress of waxy oil gels. Industrial & Engineering Chemistry Research, 52(7), 2732-2739.
Bono, A., Anisuzzaman, S. M., & Ding, O. W. 2014. Effect of process conditions on the gel viscosity and gel strength of semi-refined carrageenan (SRC) produced from seaweed (Kappaphycus alvarezii). Journal of King Saud University Engineering Sciences, 26(1), 3-9.
Chala, G. T., Sulaiman, S. A., Japper-Jaafar, A. & Kamil, W. A. 2015. Study on influence of flow rates on voids in waxy crude oil subjected to dynamic and static cooling. Journal of Mechanical Engineering and Sciences, 9, 1586-1594.
Chala, G. T., Sulaiman, S. A., Japper-Jaafar, A. & Kamil W. A. 2016. Investigation of convective heat transfer coefficient and initial temperature of waxy crude oil on the formation of voids. International Journal of Automotive & Mechanical Engineering, 13(3), 3754-3762.
Coto, B., Martos, C., Espada, J. J., Robustillo, M. D. & Peña, J. L. 2014. Experimental study of the effect of inhibitors in wax precipitation by different techniques. Energy Science and Engineering, 2(4), 196-203.
Kané, M., Djabourov, M., Volle, J. L. , Lechaire, J. P. & Frebourg, G. 2003. Morphology of paraffin crystals in waxy crude oils cooled in quiescent conditions and under flow. Fuel, 82(2), 127-135.
Koocheki, A., Taherian, A.R., Razavi, S. & Bostan, A. 2009. Response surface methodology for optimization of extraction yield, viscosity, hue and emulsion stability of mucilage extracted from Lepidium perfoliatum seeds. Food Hydrocolloids 23(8), 2369-2379.
Kralova, I., Sjöblom, J., Øye, G., Simon, S., Grimes, B. A. & Paso, K. 2011. Heavy crude oils/particle stabilized emulsions. Advances in Colloid and Interface Science, 169(2), 106-127.
Le Man, H., Behera, S. K. & Park, H.S. 2010. Optimization of operational parameters for ethanol production from Korean food waste leachate. International Journal of Environmental Science & Technology, 7(1), 157-164.
Lionetto, F., Coluccia, G., D’Antona, P. & Maffezzoli, A. 2007. Gelation of waxy crude oils by ultrasonic and dynamic mechanical analysis. Rheologica Acta, vol. 46(5), 601-609.
Luthi, I. F. 2013. Waxy crude oil characterization and experimental study of the restart of a line blocked with gelled waxy crude. SPE Annual Technical Conference and Exhibition, Lousiana, USA, 5433-5443.
Oh, K., Jemmett, M. & Deo, M. 2009. Yield behaviour of gelled waxy oil: Effect of stress application in creep ranges. Industrial & Engineering Chemistry Research, 48(19), 8950-8953.
Pendersen K.S & Rønningsen H.P. 2003. Influence of wax inhibitors on wax appearance temperature, pour point and viscosity of waxy crude oils. Energy Fuels 17(2), 321-328.
Ridzuan, N., Adam, F., & Yaacob, Z. 2016. Evaluation of the inhibitor selection on wax deposition for Malaysian crude oil. Petroleum Science and Technology, 34(4), 366-371.
Sakthipriya, N., Doble, M. & Sangwai, J. S. 2015. Fast degradation and viscosity reduction of waxy crude oil and model waxy crude oil using Bacillus subtilis. Journal of Petroleum Science and Engineering, 134, 158-166.
Torgut, G., Tanyol, M., Biryan, F., Pihtili, G., & Demirelli, K. 2017. Application of response surface methodology for optimization of Remazol Brilliant Blue R removal onto a novel polymeric adsorbent. Journal of the Taiwan Institute of Chemical Engineers, 80, 406-414.
Wachs, A., Vinay, G. & Frigaard, I. 2009. A 1.5D numerical model for the start-up of weakly compressible flow of a viscoplastic and thixotropic fluid in pipelines, Journal of Non-Newtonian Fluid Mechanics, 159(1-3), 81-94.
Yao, B., Li, C., Yang, F., Zhang, Y., Xiao, Z. & Sun, G. 2016. Structural properties of gelled Changqing waxy crude oil benefitted with nanocomposite pour point depressant. Fuel, 184, 544-554.
Downloads
Published
Issue
Section
Total Views: 82
| 
Total Downloads: 75
