RECOVERY OF USED LUBRICATING OIL BY GLACIAL ACETIC ACID WITH TWO DIFFERENT ACTIVATED CARBONS
DOI:
https://doi.org/10.51200/bsj.v43i2.4510Keywords:
Acid clay treatment, activated carbon, optimization, response surface methodology, used lubricating oilAbstract
Recovery of used lubricating oil (ULO) generally comprises cleaning, drying, and adsorption in order to eliminate water, sludge, and impurities. As the ULO is one of the hazardous wastes generated in various industrial and automotive industries, it should not be used or disposed of in ways that are harmful to the environment. The main purpose of this study was to investigate the effectiveness of two different types of activated carbons (ACs) which are coconut AC (CAC) and rice husk AC (RHAC) in recovering the ULO. Glacial acetic acid was used in the acid treatment as it does not react with the base oils, and the ACs were substituted with the clay used in the clay treatment. The recovered oil was analysed through analytical characterizations, which are Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible (UV-vis) spectroscopy and atomic absorption spectrometry (AAS). FTIR analysis revealed that the properties of the untreated ULO samples improved by removing the carbonyl compounds. In terms of metal removal, RHAC had shown better performance than CAC as it gave low metal contents in AAS. The response surface methodology (RSM) was used to study the optimum process parameters that would maximise the efficiency of the process. There are two factors that were manipulated, which are the weight of adsorbent (A) and speed of mixing (B). For CAC, the optimum value of factors A was 4.00 g while the B was set to 524.89 rpm. Meanwhile, for RHAC, the optimum value of factors A was 2.29 g while the B was set to 4000 rpm. CAC has higher desirability with 0.83 compared to RHAC with 0.69.
References
Moura, L. G. M., Assunção Filho, J. L. and Ramos, A. C. S. (2010) Recovery of used lubricant oils through adsorption of residues on solid surfaces. Braz. J. Petroleum Gas, 4(3), 91–102.
Josiah, P. N. and Ikiensikimama, S. S. (2010) Effect of desludging and adsorption ratios on recovery of low pour fuel oil (LPFO) from spent engine oil. Chem. Eng. Res. Bull., 14(1), 25–28.
Osman, D. I., Attia, S. K. and Taman, A. R. (2018) Recycling of used engine oil by different solvent. Egypt. J. Pet., 27(2), 221–225.
Diphare, M., Muzenda, E., Pilusa, T. J. and Mollagee, M. (2013) A comparison of waste lubricating oil treatment techniques. 2nd International Conference on Environment, Agriculture and Food Sciences, (ICEAFS’2013), Kuala Lumpur, Malaysia, 106–109.
Abdel-Jabbar, N. M., Al Zubaidi, E. A. H. and Mehrvar, M. (2010) Waste lubricating oil treatment by adsorption process using different adsorbents. Int. J. Chem. Biol. Sci., 3(2), 70–73.
Udonne, J. D. and Bakare, O. A. (2013) Recycling of used lubricating oil using three samples of acids and clay as a method of treatment. Inter. Arch. App. Sci., 4(2), 8–14.
Rahman, M. M., Siddiquee, T. A., Samdani, S. and Kabir, K. B. (2008) Effect of operating variables on regeneration of base-oil from waste oil by conventional acid-clay method. Chem. Eng. Res. Bull., 12, 24–27.
Anisuzzaman, S. M., Abang, S., Krishnaiah, D. and Azlan, N. A. (2019) Removal of used motor oil from water body using modified commercial activated carbon. Malays. J. Chem.c 21(1), 36–46.
Aljabiri, N. A. (2018) A comparative study of recycling used lubricating oils using various methods. J. Sci. Eng., 5(9), 168–177.
Shaikh, R. and Mahanwar, P. (2018) Reclamation of used engine oil using polymeric flocculants. Int. J. Chem. Sci., 16(2), 1–14.
Omolara, A. M., Olurotimi, A. D., Olatunji, G. O. (2015) Regeneration of used lubricating engine oil by solvent extraction process. Int. J. Energ. Env. Res., 3(1), 1–12.
Kamal, A. and Khan, F. (2009) Effect of extraction and adsorption on refining of used lubricating oil. Oil Gas Sci. Technol. – Rev. IFP, 64(2), 191–197.
Rincon, J., Cañizares, P. and García M. T. (2007) Regeneration of used lubricant oil by ethane extraction. J Supercrit. Fluid., 39(3), 315–322.
Hamad. A., Al-Zubaidy, E., Fayed, M. E. (2005) Used lubricating oil recycling using hydrocarbon solvent. J Environ Manage., 74(2), 153–159.
Udonne, J. D. (2011) A comparative study of recycling of used lubrication oils using distillation, acid and activated charcoal with clay methods. J. Petroleum Gas Eng., 2(2), 12–19.
Hamawand, I., Yusaf, T. and Rafat, S. (2013) Recycling of waste engine oils using a new washing agent, Energies, 6(2), 1023–1049.
Shakirullah M., Ahmad I., Khan M. A., Ishaq M., Rehman H. and Saeed, M. (2006) Spent lubricating oil residues as new precursors for carbon. Fuller. Nanotub. Car. N., 14(1), 39–48.
Riyanto, T. A. A. and Juliantydjawi, D. P. (2018) The effect of treatment with activated carbon on the metal content in reuse of lubricating oil waste. MATEC Web of Conferences, 154 (01018), 1-5.
Bhaskar, T., Uddin, A., Muto, A., Sakata, Y., Omura, Y., Kimura, K. and Kawakami, Y. (2004) Recycling of waste lubricant oil into chemical feedstock or fuel oil over supported iron oxide catalysts. Fuel, 83(1), 9–15.
Emam, E. A. and Shoaib, A. M. (2012) Re-refining of used lube oil , II- by solvent/clay and acid/clay-percolation processes. ARPN J. Eng. Appl. Sci., 2(11), 1034–1041.
Osman H. (2019) Model Prediction and optimization of waste lube oil treated with natural clay. Processes, 7(10), 729–743.
Mekonnen, H. A. (2014) Recycling of used lubricating oil using acid-clay treatment process, M. Sc. thesis, Addis Ababa University, Addis Ababa Institute of Technology (AAiT), 1–71.
Oladimeji, T. E., Sonibare, J. A., Omoleye, J. A., Adegbola, A. A. and Okagbue, H. I. (2018) Data on the treatment of used lubricating oil from two different sources using solvent extraction and adsorption. Data Brief, 19, 2240–2252.
Timur A. (2017) Reclamation of used lubricating oils using magnetic nanoparticles and caustic soda; M. Sc. thesis; Department of materials science and engineering, Graduate school of engineering and science, Bilkent university; 1–81.
Honda T and Sasaki A. (2018) Development of a turbine oil contamination diagnosis method using colorimetric analysis of membrane patches. J. Adv. Mech. Des. Syst. Manuf., 12(4) 1–8.
Bono, A., Krishnaiah, D. and Rajin, M. (2008) Products and process optimization using response surface methodology, Universiti Malaysia Sabah Press, Kota Kinabalu, Sabah, Malaysia.
Bono, A., Anisuzzaman, S. M. and Ding, O. W. (2014) Effect of process conditions on the gel viscosity and gel strength of semi-refined carrageenan (SRC) produced from seaweed (Kappaphycus alvarezii). J King Saud Univ Eng Sci., 26(1), 3–9.
Behera, S. K., Meena, H., Chakraborty, S. and Meikap, B. C. (2018) Application of response surface methodology (RSM) for optimization of leaching parameters for ash reduction from low-grade coal. Int. J. Min. Sci. Technol., 28(4), 621–629.
Hussain, K. and Karmakar, S. (2014) Condition assessment of transformer oil using UV-Visible spectroscopy; Power Systems Conference (NPSC), Eighteenth National, IEEE, 1–5.
Downloads
Published
Issue
Section
Total Views: 142
| 
Total Downloads: 36
